Changzhou Joinbrain Motor Co., Ltd.

Under normal circumstances, the fan motor of the indoor unit of the air conditioner does not need to be lubricatedIf you really need to add oil, you can only add oil to the place where the motor bearing seal is in the process of running the fan motor. However, such refueling will not work too well. If you are professional enough, you can also disassemble the bearing at the left end of the motor and add lubricating oil to the bearing, which will have a certain effect.

For the air compressor, it is necessary to use a special oil gun to add lubricating oil when refueling, and pay attention to the details of the operation, such as using the oil gun that matches the air compressor motor model, and pay attention to the air compressor oil is divided into two types: high-speed motor grease and low-speed motor oil, which cannot be mixed. The amount of oil added each time is 0.9g, and it needs to be added once every 2000 hours.

In general, the refueling of fan motor bearings for air conditioners and air compressors needs to be handled with caution, and there may be risks if it is operated by non-professionals. Therefore, it is advisable to consult a professional or refer to the equipment use and maintenance manual before performing any lubrication operation.